PANEL TRAILERS

MTE Panel Trailers - Innovative, practical & reliable. Carry larger panels, with more flexibility than ever before!

The limitation in height of a standard panel trailer is caused by the axle itself. MTE sought to solve this problem and have succedeed with our range of innovative panel trailers.

With independent suspension, the MTE Panel Trailer axle does not need to go right through the chassis, allowing panels to be slotted into the trailer-well between the wheels, down to 200mm off the ground!

This means that you can transport a 4m panel upright without going over the NZ Transport 4.3m height restriction. Standard panel trailers could not accommodate this, which would result in the panels having to be transported flat - thereby creating a 4m wide load creating another problem rather than a solution.

FEATURES

Modern Transport Engineers are innovators, focusing on strength and robust engineering offering long-term efficiency, safety and solid reliability. As well as the standard features and optional extras listed, our Panel Trailers can also be fitted with a variety of other accessories to suit your needs.

  • 22.5 Inch axles, meaning large brakes & better ground pressure.
  • MTE Hydraulic suspension creates a high stability trailer.
  • 600mm suspension travel makes this trailer great for worksites.
  • Independent suspension allows lower panel height (as low as 200mm off the ground when trailer is loaded).
  • Removable Panel racks.
  • Hydaulic clamp feet mean it is quick and easy to secure loads.
  • Nylon buffer pads for protecting panels.
  • Larger panels can be carried inside of the trailer-well, or on exterior of rack for smaller panels.
  • Purpose built lighter tare weight.
  • Dual front lifting rams.
  • Extendable versions available.

MODELS

3R4 PANEL TRAILER

MTE is able to manufacture to your required size to suit varied applications. View the drawings and specifications for each model below. If you're not sure which trailer is best for your operation, contact one of our team.

  • GVM: 30,000kg
  • Tare: From 7500kg
  • Forward Length: 9200mm
  • Lift Height: 600mm
  • Flat Deck Height: 900mm (Travelling)
  • Internal Deck Height: 250mm (Fully Lowered)

4R4 PANEL TRAILER

MTE is able to manufacture to your required size to suit varied applications. View the drawings and specifications for each model below. If you're not sure which trailer is best for your operation, contact one of our team.

  • GVM: 40,000kg
  • Tare: From 9980kg
  • Forward Length: 9200mm
  • Lift Height: 600mm
  • Flat Deck Height: 900mm (Travelling)
  • Internal Deck Height: 250mm (Fully Lowered)

After something a bit more custom?

TALK TO THE TEAM »

MODERN TRANSPORT GROUP

Stay up to date with Modern Transport Engineers.